Steel industryFood industryEquipment for metal workingFoundry industryMining industrySugar millsCeramic IndustryAutomotive industry
GRACIDA offers a wide variety of equipment for the service of the steel industry
Special lifting beam design for handling steel plates.
To supply direct current voltage to electromagnets and electromagnetic separators.
GRACIDA offers a great variety of equipment for the separation of ferrous contaminant in the processes of the food industry.
MAGNETIC SEPARATORS FOR LIQUIDS
GRACIDA offers a wide variety of equipment for the mechanical metal industry.
Ideal for lifting steel plates, steel components, rods or round pipe, etc.
GRACIDA offers a wide variety of equipment for the foundry, transformation and metal recycling industry, such as circular, rectangular magnets, etc.
To supply direct current voltage to electromagnets and electromagnetic separators.
GRACIDA offers a wide variety of separation equipment for the mining and cement industry, for the protection of crushing and transportation equipment from possible damage caused by ferrous contaminants (blades, rods, plates, etc.)
GRACIDA offers a wide variety of equipment to protect the different processes of sugar mills.
Magnetic filters for molasses or liquor.
Permanent magnetic filters, ideal for the separation of fine ferrous contamination and ferrous husks that can be released by the pipes in molasses or liquor processes. This is the first crucial point in the separation of ferrous contamination in sugar production.
Self-cleaning magnetic drums with stainless steel cabinet
Ideal systems for the automatic separation of ferrous contamination, excellent as a first step in dry sugar. It is recommended to install in bucket lifter discharge, duct discharge, worm discharge, screen discharge, etc. in areas where the feed is dosed.
Permanent magnetic grid.
Ideal for separating ferrous contamination in dry sugar processes, capable of separating fine and extra-fine ferrous contamination, increasing the quality and purity of the sugar. It is recommended to install in duct discharge, conveyor belts, screen discharge, packaging lines, etc.
Magnetic grids for centrifuges.
Ideal for the separation of ferrous contamination, protecting the meshes of the centrifuges.
Self-cleaning magnetic grids.
Nowadays, automation and safety in the food industry are in vogue.These self-cleaning magnetic grid systems are state-of-the-art in magnetic separation; they are capable of separating fine and extra-fine ferrous contamination automatically with a simple manual movement. Ideal for dry sugar, they are recommended to be installed in screen discharges, packaging lines, worm conveyor outlets, scale outlets, etc.
Permanent magnetic grid with pneumatic self-cleaning system
Nowadays, automation and safety in the food industry are in vogue. These pneumatic self-cleaning magnetic grid systems are state-of-the-art in magnetic separation, capable of separating fine and extra-fine ferrous contamination automatically and in a programmed manner.
Ideal for dry sugar,they are recommended to be installed in screen discharge, packaging lines, worm conveyor outlets, scale outlets, etc.
High magnetic density bench.
For those seeking to root out all ferrous contamination. For its multiple steps (10 to 20 steps) in a single magnetic system, they have become the most efficient on the market.
Ideal for dry sugar,they are recommended to be installed in screen discharge, packaging lines, worm discharge, etc.
Electromagnetic separator
For the separation of ferrous contamination such as: chains, plate pieces, chain sections, profiles, screws, etc. that can damage your mills, lowering the efficiency of the mill or cause production stoppages.
GRACIDA offers a wide variety ofequipment for the separation of ferrous contaminants in the ceramic industryprocesses.
Permanent magnetic filters
Ideal for the separation of fine and extra-fine ferrous contamination, increasing the quality of your toilets, floors, tiles, dishes, porcelain, etc.
Excellent for: ceramic paste, slips, feldspar fluids, enamel preparation and enameling lines.
Installing magnetic filters in line multiplies their magnetic separation efficiency, reaching the highest quality standards for your product.
Permanent “tg” series magnetic filters
Ideal for the separation of fine and extra-fine ferrous contamination, increasing the quality of your toilets, floors, tiles, dishes, porcelain, etc.
Excellent for low pressure lines: as enamel preparation and enameling lines.
Installing magnetic bench in line multiplies their magnetic separation efficiency, reaching the highest quality standards for your product.
Permanent magnetic grids
Ideal for the separation of extra-fine ferrous contamination in bulk products, powders (feldspar) considerably increasing the quality and purity of your products.
They can be installed in bulk lines such as: belt falls, duct feed or outlets, etc.
Self-cleaning magnetic grids
Ideal for the separation of fine and extra-fine ferrous contamination in bulk products, dry powders, considerably increasing the quality and purity of your products.
Self-cleaning magnetic grids
Ideal for the separation of fine and extra-fine ferrous contamination in bulk products, dry powders, considerably increasing the quality and purity of your products.
Due to their automatic self-cleaning design, they are state-of-the-art equipment, since they are capable of cleaning the bars in an automatic and programmed manner, depositing the ferrous contaminant in a container or duct.
Ideal for installation in the discharge of rotary valves, screens, worm outlets, where the feed is dosed.
Magnetic bench systems for powders
Ideal for the separation of fine and extra-fine ferrous contamination, increasing the quality and purity of your products; ideal for powders or bulk products.
Due to their multiple magnetic steps, they are capable of reaching the highest quality standards for your products
They can be installed in bucket lifter discharge, screen discharge, wormdischarge, rotary valve discharge, etc.
Screen discharge, worm discharge, rotary valve discharge,etc.
Permanent magnetic drums with self-cleaning system
Ideal for the separation of ferrous contamination, very efficient as a first step in the separation of ferrous contamination.
Ideal for handling powders or dry bulk products
They can be installed in screen discharges, worm discharges, duct falls, etc
Permanent magnetic plate.
Ideal for trapping ferrous contamination such as burrs, screws, etc.
They can be installed in material falls such as: ducts, band discharges, hopper outlets, etc.
Permanent magnetic separator.
Ideal for trapping ferrous contamination such as burrs, screws, etc. that can be carried when transporting products on conveyor belts
They are installed suspended on the conveyor belt to separate the ferrous contaminant in products such as: silica sand, clay, dolomite, feldspar, etc.
GRACIDA offers a wide variety of equipment for the separation of ferrous contaminants in the automotive industry processes.
Magnetic bars and grids for phosphating lines
Inside the bag filters and in the phosphating process lines, this magnetic equipment is the best option to separate fine and extra fine ferrous contamination.
Permanent magnetic filters for fluids
Ideal for installation in engine grinding lines, in lines where coolants are being handled.
They are manufactured in both manual cleaning and self-cleaning versions, excellent for separating fine and extra-fine ferrous contamination while keeping your coolants clean.
Magnetic tools for the automotive industry
Magnetic claws: excellent for dragging steel sheets, for safely holding and handling steel parts or components.
Magnetic sweeper: excellent for separating ferrous contamination in yards, vehicle flow areas, work areas, etc.
Powerful magnetic field that attracts all the burr of iron, screws, steel rods, etc. keeping work areas clean.
Permanent magnetic float: when there is a pallet of steel sheets or packs of steel sheets or components, these floats automatically separate the upper sheets, allowing to grab or drag the steel sheet quickly, conveniently and safely.
Magnetic squares: ideal for holding steel plates or components, allowing the parts to be welded quickly and safely.
Magnetic lifters for steel plates or components
In the handling of steel components, pantograph feeding and handling of steel cutouts, magnetic lifters are the best option.
They do not need electrical power, nor magnetism.
Magnetic lifters, either individual or in group, are very efficient and safe in production processes.
Electromagnet systems for handling steel plates
In the reception of steel plates, cut and production line feeding, etc., electromagnet systems are ideal for handling steel plates, as they can lift 1 or several plates at a time.
Their controls have safety backup systems in case of electricity failure.
Electromagnets and magnetic separators for foundry area
Circular electromagnets: for scrap handling in foundry processes
Magnetic separators: to be installed suspended on the conveyor belts, ideal for separating ferrous contamination such as: steel drippings, steel pieces, etc.
Magnetic pulleys: to be installed at the end of conveyor belts as a driving pulley, they help to separate ferrous contamination automatically, separating steel drippings, foundry burrs, etc.
